
Operating Procedures
Cage Unloading System
36
11. Pull the third (DUMPER TILT) hydraulic lever and hold it until the cradle cylinders are fully extended. The cylin-
ders are fully extended when the cradle stops tilting upward. Then release the lever. (See Figure 11)
12. Wait about 10 to 15 seconds and push the third (DUMPER TILT) hydraulic lever and hold it until the cradle cyl-
inders are fully retracted. The cylinders are fully retracted when the cradle stops tilting downward. Then release
the lever. (See Figure 12)
13. Pull fourth (LIFTING TRANSFER CHAIN CONVEYOR) hydraulic lever and hold until the chicken cage trans-
fers to the washer bottom section. As soon as the empty chicken cage reaches the washer cradle, release
the lever immediately.
FIGURE 11
FIGURE 12
UNLOADING SYSTEM WITH CAGE WASHING SYSTEM (CONT’D)