5
Briggs & Stratton Power Products Manual Transfer Switch
Installation and Owner’s Manual
Equipment Description
These transfer switches are intended to operate
compatible electrical loads of normal residential
installations.The load is connected either to utility power
(normal) or home standby power (emergency).
These manual transfer switches are equipped with two
circuit breakers (“GENERATOR SUPPLY” and “UTILITY
SUPPLY”) and a mechanical interlock.The “GENERATOR
SUPPLY” circuit breaker provides power from the
generator to the load devices wired to the manual transfer
switch.The “UTILITY SUPPLY” circuit breaker provides
utility power from the distribution panel to the load
devices wired to the manual transfer switch.
The mechanical interlock allows the circuit breakers for
either the generator power “GENERATOR SUPPLY” or the
utility power “UTILITY SUPPLY” to be turned on to
provide power to the selected house loads.These manual
transfer switches will not allow utility line power and
generator power to be connected to a load device at the
same time.
If utility line power is restored while generator power is
being used, there will be no affect on the generator or
transfer switch components.When utility power is
restored, follow the instructions in the section “System
Operation”.
INSTALLATION
Unpacking
Delivery Inspection
After removing the carton, carefully inspect the transfer
switch components for any damage that may have occurred
during shipment.
IMPORTANT: If loss or damage is noted at time of
delivery, have the person(s) making delivery note all damage
on the freight bill and affix his signature under the
consignor's memo of loss or damage. If loss or damage is
noted after delivery, contact the carrier for claim
procedures. Freight damaged parts are not warranted.
Shipment Contents
• Manual Power Transfer Switch
• Installation and Owner’s Manual
Mounting Dimensions
Figure 1 depicts the physical size and mounting hole
locations of the manual transfer switch enclosure.The
transfer switch enclosure is commonly secured through the
predrilled holes, as shown.
Figure 1 — Manual Power Transfer Switch Dimensions
Model 071002
Model 071003
Enclosure Dimensions
Mounting Dimensions
Enclosure Dimensions
Mounting Dimensions
14.25”
16.875”
7.125”
13”
16.75”
14.25”
5”
6.625”
3.125”
8”
