Briggs & Stratton 40375, Operator'S Manual

Page: 15 / 104

15
System Control Panel
Compare this control panel illustration with your generator to familiarize yourself with the location of these important controls:
A - Menu/Programming Navigation Buttons — See Menu
section for details
B - USB Port — Authorized Dealer Service Use Only
C - Generator Operation Control Buttons —
ti
AUTO ” Normal operating position. Press and hold
button to put unit into Automatic mode. If an utility
power outage is sensed, the system will start the
generator. When utility power is restored, auto lets the
engine stabilize internal temperatures, shuts off the
generator, and waits for the next utility outage.
ti OFF ” Turns off running generator, prevents unit from
starting, and resets any detected service codes.
OFF must be pressed and held for more than 5
seconds in order to reset service codes.
ti MANUAL ” Used to manually start the generator.
“AUTO” LED — LED will light when unit is placed into
Auto mode. LED will blink if exercise cycle is not set
or set to OFF.
D - 15 Amp Fuse — Protects the home generator DC control
circuits. If the fuse has ‘blown’ (melted open) or was
removed, the engine cannot crank or start. Replace the
fuse using only an identical ATO 15A fuse. One spare
fuse is supplied with the unit.
E - Cover — This protective cover must be opened to access
the fuse and the USB port.
F - Digital Display — Displays generator mode, menu
options, service codes, and service engine indicators
A
B
C
F
E
D
NOT
for
REPRODUCTION