Briggs & Stratton 2691251-00, Operator'S Manual

Page: 25 / 288

Not
for
Reproduction
en
Troubleshooting the Mower
PROBLEM LOOK FOR REMEDY
Mower cut is uneven.
Tractor tires not properly
inflated.
See Check Tire Pressure section.
Mower cut is rough
looking.
Engine speed too slow. Set to full throttle.
Ground speed too fast. Slow down.
Engine stalls easily
with mower engaged.
Engine speed too slow. Set to full throttle.
Ground speed to fast. Slow down.
Dirty or clogged air filter. See Servicing Air Filter section.
Cutting height set too low. Cut tall grass at maximum cutting height during first pass.
Engine not up to
operating temperature.
Run engine for several minutes to warm-up.
Starting mower in tall
grass.
Start the mower in a cleared area.
Engine runs and tractor
drives, but mower will
not drive.
PTO not engaged. Engage the PTO.
NOTE : For all other problems, contact an Authorized Service Dealer.
25