Not for
Reproduction
30
Advanced Settings Screen
Advanced setting parameters are preset at the factory for a typical installation. To view Advanced Settings items and/or to
change items, follow the instructions listed below.
Advanced settings are critical to the operation of the generator. Careful consideration should be taken when
working in the Advanced Settings menu. Exercise caution when selecting and verifying parameters for the
generator and region where the generator is being operated. Confirm all settings before operating the generator
for the first time.
For advanced menu items, press and hold the left arrow, right arrow, and escape key
for 3 seconds. Follow the
prompts as outlined below.
INSTALLATION
cont.
NOTICE
In the Advanced Setting menu, a three button access code (left arrow, right
arrow, and escape key), must be pressed simultaneously once to enter the
menu and again to change any setting. After each confirmation of a setting, the
selection will display solid for 2 seconds before moving to the next program item
Figure 22
Advanced Settings Screen
kW
kVa
FLASHING
50/60 Hz
FLASHING
Hz
PHASE
VOLTS
SOFTWARE
Version Displayed
VOLTS
FLASHING
SINGLE
or
THREE
FLASHING
E-Governor
Check
Stepper Motor
will sweep through throttle
range for visual veri
fi
cation
or
or
or
or
or
or
or
or
or
or
