41
To change the System Log settings of the access point, follow these steps:
1. Click Administration > System Log > System Logs .
This page displays the System Logs setting information.
2. Configure the System Logs setting.
• Logging
- If you want to record the system log to your host, check Enable.
• Maximum Log Entry — Enter the maximum number for the log to be recorded at one
time.
• Log Level Configuration — Select the events (about RAM memory, Flash Memory,
SNMP Trap, etc.) that you want the access point to keep a log.
• Remote Log Settings — Allow to record for the remote server.
-
Server —Display the IP address of the remote server.
-
UDP Port— Display the UDP port of the remote server.
-
Description—A brief description of the remote server.
-
Add — Add a new server to be recorded.
-
Delete—Delete the selected server from the remote log table.
-
Edit—Edit the selected server.
3. Click Save.