73
Exposure Compensation (ExpComp), Image Flip, Speed by Zoom and ICR
function. Each setting is explained as follows:
A. BLC
Users can choose to activate or disable the BLC function. Click on the
button <Set> to save the setting.
B. Sharpness
Increasing the sharpness level can make the image looked sharper;
especially enhancing the object
’s edge. The Sharpness value is
adjustable from 1 to 15. Click on the button <Set> to confirm the setting.
C. ExpComp
Users can define the value of Exposure Compensation; the value
ranges from 1 to 15.
D. Flip
Users can track an object continuously when it passes through under
the Dome Camera with setting Flip to Mechanical (M.E.) mode or
Digital Flip (Image) mode.
NOTE-
If a Preset Position or a point for other function (ex.
Sequence) is set in the position that can only be reached through FLIP
motion, then when the Flip function is turned off, the position cannot be
reached anymore.
NOTE-
To
make the Dome Camera tilt between a specific range,
such as -10° to +100° or -10° to +190°, please go to the
Tilt Range
setting page
to set the tilt angle range. Otherwise, the Dome Camera
will tilt 90° as the default setting.
M.E. Mode
Summary of Contents for OSD-200 20xp
Page 1: ...2 Megapixel Speed Dome Network Camera OSD 200 20xp User s Manual...
Page 9: ...5...
Page 22: ...18...
