43
The images of the duration will be uploaded to FTP when the
alarm input is triggered. The setting range is from 1 to 9999
seconds. Select <Upload during the trigger active> to make the
images keep being uploaded to FTP during the trigger active until
the alarm is released. Set the Image frequency as the upload
frame rate. The setting range is from 1 frame to 15 frames.
NOTE-
Make sure FTP configuration has been completed.
Refer to
FTP
for further details.
Upload Image by E-Mail
Select this item and the Administrator can assign an e-mail
address and configure various parameters. When the alarm is
triggered, event images will be sent to the appointed e-mail
address.
<Pre-trigger buffer> function allows users to check what
happened to cause the trigger. The <Pre-trigger buffer> frame
rate could be pre-determined.
On the other hand, <Post-trigger buffer> is for users to upload
certain amount of images after
alarm input
is triggered.
Check the box <Continue image upload> to upload the triggered
images during certain time or keep uploading until the trigger is
off. Select <Upload for __sec> and enter the duration in the blank.
The images of the duration will be uploading by E-mail when the
alarm input is triggered. The setting range is from 1 to 9999
seconds. Select <Upload during the trigger active> to make the
images keep being uploaded to E-mail during the trigger active
until the alarm is released. Set the Image frequency as the upload
frame rate. The setting range is from 1 frame to 15 frames.
NOTE-
Make sure SMTP configuration has been completed.
Please refer to
for further details.
Summary of Contents for OSD-200 20xp
Page 1: ...2 Megapixel Speed Dome Network Camera OSD 200 20xp User s Manual...
Page 9: ...5...
Page 22: ...18...
