35
7.3 Network
The Network setting can be found under this path:
System> Network
.
Click on the <Network> category, there will be a drop-down menu with tabs
including <Basic>, <QoS>, <SNMP>, and <UPnP>.
7.3.1
Basic
The Basic setting can be found under this path:
System> Network>
Basic
.
Users can choose to connect to the IP Camera with fixed or dynamic
(DHCP) IP address. The IP Camera also provides PPPoE support for
users who connect to the network via PPP over Ethernet (PPPoE).
A. General
a. Get IP address automatically (DHCP)
The camera’s default setting is <Use fixed IP address>. Please refer
to User
’s Manual for login with the default IP address.
If select <Get IP address automatically>, after the IP Camera
restarts, users can search it through the installer program:
EasyConfig, which can be found in AutoRun Tool in the supplied CD.
NOTE-
Please make the
record of the IP Camera’s MAC
address, which can be found in the label of the camera, for
identification in the future.
b. Use fixed IP address
To setup static IP address, select <Use fixed IP address> and move
the cursor to the IP address blank and insert the new IP address, ex.
192.168.7.123; then go to the Default gateway (explained later)
blank and change the setting, ex. 192.168.7.254. Press <Save> to
confirm the new setting.
IP address- This is necessary for network identification.
Subnet mask
Summary of Contents for OSD-200 20xp
Page 1: ...2 Megapixel Speed Dome Network Camera OSD 200 20xp User s Manual...
Page 9: ...5...
Page 22: ...18...
