Brickcom OSD-200 20xp, User Manual

Page: 30 / 80

26
Web Recording button- Click on the <Recording> button and the
Live View through the web browsing will be directly recorded to
the specific location on the local hard drive, which could be
configured in the <File Location> page. The default storage
location for the web recording is: C:\. Please refer to File Location
for further details.
For users with Windows 7 operating system, it is required to log
on as an Administrator to implement the Web Recording function.
Control Panel Button- to open and close the Control Panel on the
homepage.
Zoom Adjustment- to control zoom in / out. Or move the cursor
closely onto the zoom adjustment bar to the desired zoom ratio.
Auto Focus (Continuous AF)- to enable AF mode. In this mode,
the camera will keep in focus automatically and continuously
regardless of zoom changes or any view changes. The Focus
status will also be displayed above the live video pane as shown
below.
Manual Button- users can adjust focus manually via Near / Far
buttons.
Near / Far buttons- Click on the <Manual> button first, and users
can adjust focus manually via <Near> and <Far> buttons. The
status will also be displayed above the screen as shown below.
c. Pan/Tilt Control
Users can implement pan/tilt control by first moving the cursor to the live video
pane; then left click and drag the pointer in any direction.
d. Optical / Digital Zoom Control
In Normal View display mode, users can implement zoom in / out by first moving
the cursor to the live video pane and then rotating the mouse wheel. As in Full
Screen mode, users can directly rotate the mouse wheel to zoom in / out on the
image. Digital zoom is only available when the function is activated and which is
set in <Camera-Misc1> page under the <PTZ> tab; refer to the Section
Camera
—Misc 1
for details. When the camera reaches the limit of its optical
range, it will automatically switch to digital zoom.