Document # 2103017 RevA
7
Printed in USA © 2017
Call Brewer Tech Support 888-Brewer-1.
Call Brewer Tech Support 888-Brewer-1.
Does table have a powered backrest?
Yes
No
Are there other problems not yet
resolved?
Yes
No
Replace foot control. Is problem fixed?
Yes
No
Does seat begin to lower before backrest
has raised to the point where the backrest
clears the rear cabinet?
Yes
No
Step 7.1
continue here
Step #
7.1
a
b
Does table return to chair position
when blue button is pressed on foot
control?
No Yes
Does the backrest raise but the seat
will not lower when return to chair blue
button is pressed on foot control?
Yes
No
Is there no movement at all, or is
movement not stopped by stop button
or foot control pedals?
No Yes
The backrest actuator return chair
that protrudes from the center of the
back of the seat section is defective
or its wiring harness (blue and red
wires) is damaged or disconnected?
With backrest raised check for closed
circuit at the blue and red wired Molex
connector. Reconnect wiring harness
or replace defective switch. Is problem
fixed?
No Yes
The backrest actuator return chair
that protrudes from the center of the
back of the seat section is defective
or its wiring harness (blue and red
wires) is damaged or disconnected?
With backrest raised check for closed
circuit at the blue and red wired Molex
connector. Reconnect wiring harness
or replace defective switch. Is problem
fixed?
Yes
No
Return to step 1
Return to step 1
Return to step 1
6000 SERIES TABLE TROUBLESHOOTING CHART (continued)
