27
5.4.1 Spin Diagnostics Screen
The Spin Diagnostics screen allows manual operation of most of the hardware on the
Cee
®
200X tool.
The controls and indicators found on the Spin Diagnostics screen are listed below:
1. Spin speed (velocity) display:
Displays the current spin chuck speed (velocity).
2. Speed box:
By pressing in this box, a numeric pad will appear to allow entry of the
desired spin speed.
3. Accel box:
By pressing in this box, a numeric pad will appear to allow entry of the
desired ramp acceleration.
4. Spin button:
Starts the spindle spinning using the entered velocity and acceleration.
5. Stop button:
Stops the spindle.
6. Dispense selector:
Pressing the desired dispense name will select and highlight it.
7. Dispense On button:
Turns on the selected dispense.
8. Dispense Off button:
Turns off the selected dispense.
9. Lid Closed check box:
Displays the status of the lid closed sensor.
10. Chuck Vacuum On button:
Turns on vacuum at the spin chuck.
11. Chuck Vacuum Off button:
Turns off vacuum at the spin chuck.
