background image

13

 

Humidity Level Setting

When the 2in1 Dehumidifier is turned on, the 

current humidity level (%) will show on the 

display screen and the light above the   icon 

will illuminate. This number will adjust as the 

2in1 Dehumidifier operates.
The Humidity Level can only be set when 

operating in Auto Mode and allows you to 

manually set a relative humidity level (%RH) 

between 30% - 80%. 

1.  Press either the   or   buttons to change 

the humidity level in 5% increments with 

each press. Stop once the desired humidity 

level is displayed on the display screen.

 

Defrost

Defrost is an automatic maintenance function 

that will only operate if a room temperature 

falls to less than 23°C. 
1.  If the light on top of the   icon turns on, 

defrosting has automatically started. The 

fan will operate on High during defrost 

and any selected operating mode will 

temporarily stop.

2.  Automatic defrost will operate for up to  

5 minutes.

3.  Once Defrost is completed, the unit will 

resume in the last selected operating mode.

WARNING

Do not disconnect the power or turn off the 

unit during defrost.

WARNING

Do not use means to accelerate the defrosting 

process or to clean, other than those 

recommended in this instruction booklet.

EMPTYING CONDENSATE WATER

During the process of dehumidification, water 

is created and needs to be expelled from the 

2in1 Dehumidifier in one of two ways:

Water Tank Drainage

The removable 6.5L water tank will collect 

water until it reaches the water level indicator 

when the tank is full. 
Once the water tank is full, the Empty Me 

indicator light on top of the 

 

icon will 

illuminate, a buzzer will sound, and the unit  

will stop automatically.
1.  Remove the water tank from the unit.
2.  Using the handle, transport the water tank to 

a drainage source.

3.  Tip the water tank and empty the water from 

the hole located on the water tank lid (1A).

4.  Replace the water tank back onto the unit. 

The unit will resume automatically in the 

last selected mode. 

1A

Summary of Contents for the Smart Dry LAD708

























Reviews: