12
Timer
The Timer operates in two ways.
1. Auto Off, where the timer determines when
to turn the unit OFF and can only be set
when the 2in1 Dehumidifier is already
turned on.
2. Delayed Start, where the timer determines
when to turn the unit ON and can only
be set when the 2in1 Dehumidifier is in
standby mode.
To program the Timer:
1. Press the button.
2. The display screen will flash ‘00’ and the
light on top of the
icon will illuminate.
3. Press the
button to increase the time
in one-hour increments, up to 24 hours.
Alternatively, you can press the
button
and then or buttons to increase or
decrease the time.
4. The time will countdown each hour,
automatically turning the 2in1
Dehumidifier ON or OFF respectively
when it reaches ‘00’.
5. To cancel Auto Off or Delayed Start, press
the
button or continue to press the
button until it reaches '00'. Alternatively,
you can press the
button and then
or buttons to change the time to ‘00’.
NOTE
When using Delayed Start, the
dehumidification mode can only be set after
the delayed start time has been entered.
WARNING
As a safety feature, the 2in1 Dehumidifier will
automatically turn off if the water tank is full,
even if the countdown timer has elapsed. The
2in1 Dehumidifier will not turn on in Delayed
Start if the water tank is full.
Filter Reset
•
The light above the filter reset icon will flash,
indicating that the filter needs to be replaced.
•
Replace the filter according to the directions.
found under Replacing the Filter in this book.
•
Once the filter is replaced, press and hold
the button for 5 seconds to reset the Filter
Reset time.
•
The built-in timer for the filter reset is 2,160
operating hours.
NOTE
The filter reset light will flash when the unit is
operating or on standby mode.
NOTE
For best performance, the filter should be
cleaned at least monthly as per the instructions
found in the Care, Cleaning & Storage section
of this book.
For optimal filter performance change between
4 - 6 months and at the start key seasonal
allergy seasons such as spring.
SensAir™ System
•
The Breville Smart Dry™ 2in1 Dehumidifier
has a built-in sensor to detect changes in the
humidity level in the air. It provides real-time
updates through the LED screen and the
visual live humidity indicator light.
•
The LED screen provides a real-time humidity
display both on the control panel and at the
front of the unit.
•
The live humidity indicator light is an
integrated system that changes colour to
visually identify the current level of relative
humidity % in the air and also mapped to
Breville Home Connect App.
•
The live humidity indicator light will change
colour according to the current relevant
humidity (%).
−
Green (Low): Below 40% relative humidity.
−
Blue (Good): Between 40% - 60% relative
humidity.
−
Red (High): Above 60% relative humidity.
