10
Assembly
BEFORE FIRST USE
1. Remove and safely discard any packaging
material and check for any missing or
damaged parts before discarding.
2. Open the air inlet grille at the back of the
unit and remove the AntiViral HEPA-13 filter.
Remove packaging before first use, or when
cleaning and reassembling as per the Care,
Cleaning & Storage section of this booklet.
IMPORTANT
Remove packaging from the filter before
operating.
3. Using the carry handles, position the 2in1
Dehumidifier at least 20cm away from walls,
furniture, and other appliances.
30cm +
20cm +
20cm +
10cm +
20cm +
4. Ensure that all filters, grille, water tank and
drainage hose (if using) are correctly installed.
5. Open the air deflector covering the air outlet
grille on the top of the unit if it is closed to
allow air flow.
6. Connect the power plug to a 230V or 240V
outlet and switch the outlet on. The 2in1
Dehumidifier is now in standby mode.
When in standby mode for the first time, a
buzzer will sound.
IMPORTANT
When moving the dehumidifier, use the carry
handles and castor wheels to manoeuvre,
where possible. If lifting, use the two handles
and set down gently on a flat and level surface.
Never turn the dehumidifier upside down.
IMPORTANT
Always open the air deflector before operating
the dehumidifier. Keep all ventilation
openings clear of obstruction.
