Breville RM-BBL600XL, Instruction Booklet

Page: 4 / 11

Operating your Breville ikon Hemisphere
TM
LCD Blender
7
Why is the Breville ikon Hemisphere
TM
Blender superior?
6
What makes this blender superior?
The secret to the Hemisphere™ Blade is the
continuous movement created inside the pitcher. It
allows the Breville ikon Hemisphere
TM LCD Blender to
combine the functions of a blender with a mini food
processor for the ultimate in versatility.
Combined with a powerful motor and heavy duty
commercial grade components, the Breville ikon
Hemisphere
TM
LCD Blender is built for durability,
reliability and professional results superior to
all other blenders.
Before first use
Before using your Breville ikon Hemisphere
TM
LCD
Blender for the first time, remove any packaging
material and promotional labels. Make sure the
appliance is switched off at the power outlet and the
power cord is unplugged. Wash the lid, inner lid
blender pitcher and blade assembly (refer to
Disassembling the blender pitcher on Page 11) of the
Breville ikon Hemisphere
TM LCD Blender in warm, soapy
water with a soft cloth. Rinse and dry thoroughly. You
may opt to wash the parts in the top shelf of any
dishwasher and the pitcher in the base section of the
dishwasher. The motor base can be wiped with a damp
cloth. Dry thoroughly.
• When using your Breville ikon Hemisphere TM
LCD Blender for the first time, you may notice an
odor coming from the motor. This is normal
and will dissipate with use.
• The blending blades are extremely sharp. Avoid
any contact with fingers and hands.
Note
Step 2.
Step 3.
Turn the blender pitcher upright and insert onto
the motor base. The handle of the blender pitcher
can be positioned to the left or right hand side of
the appliance.
Step 4.
Add food or liquid into the blender pitcher ensuring
not to exceed the ‘MAX’ mark. Place the blender lid
firmly into position on the top of the blender pitcher.
Insert the clear inner lid into the blender lid and turn
clockwise to lock into position. (see Fig 1)
Fig 1
To reassemble ensure the lower part of
the Blade Holder is clipped into place by aligning the
parts and squeezing together at the edges until they
snap together, and then replace the silicon seal onto
the blade assembly with the raised rim of the
Removable Silicone Gasket facing downward. Place
the Gasket onto the Blade Assembly and push down
until it clicks into place. You should be able to read
THIS WAY UP on the gasket. (see Page 12 - Fig 1).
You will notice 2 notches on the blade assembly
(see pg 11- Fig 1). Place these notches into the 2
slots on the bottom of the jug (see 12 Fig 2). Twist
the Blade Removal System counterclockwise in the
direction of the indicator symbol until firmly locked
into position.
Assembling and attaching the blender
Step 1.
Place the motor base on a flat, dry surface such as a
table top. Make sure that the motor base is turned off
at the power outlet and the power cord is unplugged.
Motor overload protection
Your blender is equipped with motor overload
protection.
If your blender is overloaded the motor will stop and
the "Overload Protection" warning on the LCD will
start to flash.
Please do not attempt to use the blender while the
“Overload Protection” warning is flashing.
Once the warning stops flashing the blender has
cooled sufficiently and is ready to use again.
Re-select the desired speed or function button. If you
have turned the blender off you will need to switch it
back on, wait for the flashing to stop then re-select
the desired speed or function.
We recommend removing a portion of the mixture,
cutting food into smaller pieces of even size and/or
processing a smaller amount per batch.