4
Breville recommends safet
y fi
rst
At Breville we are very safety conscious. We design and manufacture consumer products
with the safety of you, our valued customer, foremost in mind. In addition we ask that you
exercise a degree of care when using any electrical appliance and adhere to the following
precautions.
Carefully read all instructions before operating the
Breville Power Blender for the
fi
rst time and save for
future reference.
Remove and safely discard any packaging material
and promotional labels before using the blender for
th
e fi
rst time.
To eliminate a choking hazard for young children,
remove and safely discard the protective cover
fi
tted
to the power plug of this appliance.
Do not place the blender near the edge of a bench
or table during operation. Ensure the surface is
level, clean and free of water and other substances.
Vibration during operation may cause the appliance
to move.
Do not use the blender on a sink drain board.
Do not place the blender on or near a hot gas or electric
burner, or where it could touch a heated oven.
Handle the blender and attachments with care
– remember the blades are razor-sharp and should be
kept out of the reach of children.
Always ensure the blender is completely assembled
before operating. The blender will not operate unless
properly assembled.
Do not use attachments other than those provided
with the blender.
Do not attempt to operate the blender by any method
other than those described in this book.
Always secure the blade assembly onto the blender
jug before attaching to the motor base.
Ensure the speed selection dial is in the OFF position
and the blender is switched off at the power outlet
and the power cord is unplugged before attaching the
blender jug.
Always operate the blender with the blender jug lid
in position.
•
•
•
•
•
•
•
•
•
•
•
•
•
Keep
fi
ngers, hands, knives and other utensils away
from moving blades.
Do not place hands or
fi
ngers into the blender jug
unless the motor and blades have come to a complete
stop. Ensure the speed selection dial is in the OFF
position and the appliance is switched off at the
power outlet and the power cord is unplugged before
removing the lid from the blender.
Ensure the motor and the blades have completely
stopped before disassembling. Ensure the speed
selection dial is in the OFF position and the appliance
is switched off at the power outlet and the power cord
is unplugged from the power outlet before attempting
to move the blender, when not in use, if left unattended
and before disassembling, cleaning or storing.
Care should be taken when removing the food from
the blender jug by ensuring the motor and the blades
have completely stopped before disassembling.
Ensure the speed selection dial is turned to the OFF
position, the appliance is switched off at the power
outlet and unplugged, before removing the lid from
the blender jug. The blender jug should then be lifted
from the motor base and the food carefully removed
before attempting to remove the blade assembly.
Do not operate the blender continuously for periods
longer than 30 seconds on any setting or if processing
a heavy load. None of the recipes in this book are
considered a heavy load. If the blender is operated
continuously for too long, it should be switched off,
unplugged and allowed to cool for 30 minutes before
recommencing.
Do not process hot or boiling liquids – allow liquids to
cool before placing into the blender jug.
Do not move the blender whilst in operation.
Do not leave the blender unattended when in use.
•
•
•
•
•
•
•
•
IMPORTANT SAFEGUARDS FOR YOUR BREVILLE POwER BLENDER
CBL6_IB_FA.indd 4
9/4/09 2:07:14 PM
