5
BREvILLE RECOMMENdS SAFETy FIRST
5
•
Be careful when handling the blending
blade assembly as the blades are very
sharp. Be careful when emptying
the blender jug and during cleaning.
Mishandling of the blades may cause
injury.
•
Do not remove the blender jug from the
motor base whilst in operation.
•
Do not use the Kinetix® Pro Ble
n
der
for anything other than food and/or
beverage preparation.
•
Do not operate the Kinetix® Pro Ble
n
der
without food or liquid in
the blender jug.
•
Do not process hot or boiling liquids.
Allow to cool before placing into the
blender jug.
•
Do not subject the blender jug to
extremes of hot or cold, for example
placing a cold jug in hot water or vice
versa.
•
Always visually inspect the blade
assembly before each use. If the
blades appear bent or damaged, or
if discoloration of the plastics noted,
please contact your Breville service
centre.
•
Keep the appliance clean. Refer to care
and cleaning.
•
The motor is protected from burning
out by an automatic, temperature
operated, cut-out switch. If the blender
is overloaded or operated continuously
for too long, the motor may overheat. If
this happens, the buttons will start to
flash and the safety cut-out switch will
prevent the blender from operating. To
operate the blender again, you must
switch off at the power outlet, unplug
and allow to cool for approximately
30 minutes. Once the motor has fully
cooled, it is ready for use again.
IMPORTANT SAFEGUARdS FOR
ALL ELECTRICAL APPLIANCES
•
Fully unwind the power cord before use.
•
Do not let the power cord hang over
the edge of a bench or table, touch hot
surfaces or become knotted.
•
To protect against electric shock do not
immerse the power cord, power plug or
appliance in water or any other liquid.
•
The appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
•
Children should be supervised to ensure
that they do not play with the appliance.
•
It is recommended to regularly inspect
the appliance. To avoid a hazard do not
use the appliance if power cord, power
plug or appliance becomes damaged in
any way. Return the entire appliance to
the nearest authorised Breville Service
Centre for examination and/or repair.
•
Any maintenance other than cleaning
should be performed at an authorised
Breville Service Centre.
•
This appliance is for household use only.
Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats. Do not use
outdoors. Misuse may cause injury.
•
The installation of a residual current
device (safety switch is recommended
to provide additional safety protection
when using electrical appliances. It
is advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.
SAvE THESE
INSTRUCTIONS
Summary of Contents for BBL800
