background image

14

Care, Cleaning & 
Storage

CAUTION

To prevent damage to the appliance, do not 

use alkaline or abrasive cleaning agents, steel 

wool or scouring pads as these can damage the 

surface of the appliance. Do not place any part 

of this appliance in the dishwasher.

CLEANING THE AQUASTATION

1.  Remove the plug from the power outlet 

before cleaning.

2.  Discard any water in the water tanks, then 

separate the pre-filtered water tank from 

the filtered water tank. Remove the filter 

cartridge from the filter holder. 

3.  Wipe the water tanks with a clean, damp, 

lint-free cloth. The filter is not washable.

CLEANING THE OUTER HOUSING

• 

Wipe with a soft, damp cloth followed by a 

soft, dry cloth to polish.

• 

Alternatively, purchase a stainless steel 

cleaner such as Breville's Stainless Steel 

Cleaner & Polish and follow directions.

• 

Do not use abrasive cleansers, pads or cloths 

which can scratch the surface.

CLEANING THE WATER SPOUT

Residue build-up or foreign substances, such 

as dust or lint, may accumulate in the water 

outlet. Clean the spout periodically using a soft 

brush (not included).

NOTE

For Breville's Stainless Steel Cleaner & Polish, 

visit Breville.com or contact Breville Customer 

Service.

CLEANING THE DRIP TRAY 

The drip tray should be removed, emptied and 

cleaned after each use. Empty the tray before 

removing the top grill and cleaning.
Remove the drip tray from the purifier and 

discard any water.
1.  Separate the top grill from the drip tray. 
2.  Wash the drip tray and grill in warm soapy 

water and dry thoroughly. 

3.  Place the grill back onto the drip tray then 

push the assembled drip tray back into 

position in front of the purifier using the 

magnetic connection. 

WARNING

To protect against electric shock, do not 

immerse cord, plug or appliance in water or 

any other liquid or allow moisture to come into 

contact with these parts.

STORAGE

Remove the plug from the power outlet.  

Follow the ‘Care & Cleaning’ instructions, 

ensuring the appliance is completely empty, 

clean and dry before storing. Stand the 

appliance upright. Do not store anything on 

top. If stored for a long period, we recommend 

following the ‘Flushing the AquaStation™’ and 

‘Preparing the Activ369 Filter' instructions 

found in this book before using the appliance 

again.

NOTE

For Breville's Stainless Steel Cleaner & Polish, 

visit Breville.com or contact Breville Customer 

Service.

Summary of Contents for AquaStation LWA063WHT

















Reviews: