2 Cautions
Page 5
2 Cautions
★
The working voltage of the camera is 6V. The camera is supplied by four or
eight AA batteries.
★
Please install batteries according to shown polarity.
★
Please unlock the write-protect before inserting the SD-card.
★
Please insert the SD-card when the power switch is in the
OFF
position before
testing the camera. The camera has no internal memory for saving images or
videos. If no SD-card is inserted, the camera will shut down automatically after
a continuous indication sound.
★
Please do not insert or take out the SD-card when the power switch is in the
ON
position.
★
It is recommended to format the SD-card by the camera when used for the first
time.
★
The camera will be in USB mode when connected to a USB port of a computer.
In this case, the SD-card functions as a removable disk.
★
In the
TEST
mode, the camera will shut down automatically after 3 minutes if
no operation is done. Please turn on the power again if you want to continue to
work with the remote.
★
Please ensure there is sufficient power when having a firmware upgrade,
otherwise the upgrade process could be interrupted. If any fault occurs after an
improper upgrading process, the camera may stop functioning properly.
