4 Advanced Operations
Page 12
Photo
:
a) Press
MENU
to display the setting menu.
b) Press
UP
or
DOWN
to select
Photo Burst
.
c) Press
LEFT
or
RIGHT
to select
3 Images
.
d) Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to cancel setting and return to info display.
4.1.8
Set Video Length
This parameter is effective and can be adjusted only when the device in the video mode
under ON mode. Its value extends from 1 to 60 seconds with a step of one second. The default
value is 10 seconds. Press
LEFT
and
RIGHT
to decrease or increase the value by 1 second.
The following shows how to set video length to
5 Seconds
provided that the previous value
is
10 Seconds
:
a) Press
MENU
to display the setting menu.
b) Press
UP
or
DOWN
to select
Video Length
.
c) Press
LEFT
or
RIGHT
to decrease or increase to
5 Seconds
.
d) Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to cancel setting and exit.
4.1.9
Set Video Sound
The following shows how to set video sound as off that the previous option is on:
e) Press
MENU
to display the setting menu.
f) Press
UP
or
DOWN
to select
Video Sound
.
g) Press
LEFT
or
RIGHT
to select
off
or
on
.
h) Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to cancel setting and return to info display.
4.1.10
Set PIR Triggering Interval Time
This parameter indicates how long the PIR (Passive Infrared motion sensor) will be disabled
after each triggering in ON mode. During this time the PIR of the device will not react to the
motion of human (or animals). The minimum interval is 0 seconds, it means the PIR works all
the time. The maximum interval is 1 hour. It means the PIR will be disabled for 1 hour after each
triggering. The default value is 1 minute. Press
LEFT
or
RIGHT
to decrease or increase the
value by 5s or 1 minute.
The following shows how to set triggering interval time to
5 Minutes
provided that the
previous value is
1 Minute
.
a) Press
MENU
to display the setting menu.
b) Press
UP
or
DOWN
to select
Interval
.
c) Press
LEFT
or
RIGHT
to decrease or increase to
5 Minutes
.
d) Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to cancel setting and return to info display.
4.1.11
Set PIR Sensitivity
This parameter defines the sensitivity of the PIR. There are three parameters: High, Normal,
and Low. The default value is “Normal”. The higher degree indicates that the
Camera
is more
easily to be triggered by motion, taking more pictures or recording more videos. It is
