Bresser FERNGLAS, Operating Instructions Manual

Page: 8 / 44

8
General Warning
Risk of blindness
Never use this device to look directly at the sun or in the direct proximity of the sun.
This will result in a risk of blindness.
• Do not place the device, particularly the lenses, in direct sunlight.
The concentration of light could cause a fi re.
• Do not disassemble the device. In the event of a defect, please contact your dealer.
The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
• Do not expose the device to high temperatures.
Privacy PROTECTION!
The binoculars are intended only for private use. Please heed the privacy of other people.
Do not use them to look into apartments, for example.
List of Parts
B
Centre axle
C
a Twist-up eyecups
or
C b Rubber eyecups
D
Dioptre adjustment
E
Body of the binoculars
F
Lens tube
G
Central focussing wheel
H
Eyepiece
I Objective lens
J
Threaded tripod connection
1)
Image circle with correctly set eye distance
Eyepieces for spectacle wearers
Depending on the model, your binoculars are equipped with either twist-up eyecups (2a) or rubber eye-
cups (2b). Since there is a larger distance between the binocular eyepiece and the pupil for those wearing
glasses, both eyecup varieties can be adjusted individually.
Twist-up Eyecups (2a)
Screw in the twist-up eyecups (2a) to use the binoculars while wearing glasses. If you are not wearing
glasses, unscrew the eyecups to achieve the required distance from your pupils.
OR
Rubber Eyecups (2b)
To use the binoculars while wearing glasses, turn the rubber eyecups (2b) toward the sides and down. If
you are not wearing glasses, leave the eyecups in the upright position to achieve the required distance from
your pupils.