Maintenance en troubleshooting
21
3
Maintenance en troubleshooting
Frequency
Maintenance
Daily
Check:
- does the parking brake work properly?
- flat tyre?
Weekly
Check tyre pressure and moving parts of the parking brake.
Annually
Full service by service engineer, adjust parking brake.
Contact your dealer for repair work. A service manual is available for the dealer.
•
Never clean the PowerSupport with a hose or high-pressure spraying pistol. The
PowerSupport should be cleaned with a damp cloth, if necessary with some
household soap dissolved in water.
•
Attention! In case of a malfunction, the PowerSupport system will not brake.
This may cause a dangerous situation on a slope, as the attendant receives
the full weight of the wheelchair and user. Therefore, immediately engage the
parking brake when identifying a malfunction.
•
In case of a malfunction, the on/off indicator will start flashing. This is a general
malfunction indication.
•
Action:
check all motor connections. If necessary secure the plug connection of the
motor. In any other case, contact the service engineer.
•
If the lights/indicators on the control unit do not blink:
Action 1:
check if the control unit cable is loose at the plug connection to the battery
pack.
Action 2:
connect the battery charger, lift the wheelchair and carefully turn one of the
wheels. The PowerSupport should start charging. In any other case, contact the
service engineer.
•
If the battery indicator lights are flashing or lit constantly, the PowerSupport is
probably still charging. Remove the plug from the battery charger. The PowerSupport
is now ready for use.
•
In case of a flat tyre, the service engineer should be contacted. If you continue to
drive, you may damage the wheels.
Summary of Contents for PowerSupport
Page 1: ...1002432 I...
