30
MB3197-EN
MAINTENANCE
Maintenance covered in this section can be carried out by the user. Other maintenance work should
be undertaken by the supplier’s qualified personnel in your area or by the help centre. For information
concerning repairs or service, please apply to the help centre in your county.
Washing the frame
The frame should be washed regularly with mild soapy water. If the frame is very dirty, a scouring
agent may be used. The frame can also be flushed using a high pressure jet spray. Spraying directly
at the ball bearings using a high speed jet spray should be avoided. Dry the wheelchair thoroughly
after washing or when it has been in the rain. If a scouring agent is used, movable parts should be
re-greased.
Disinfection
Disinfection must only be carried out by qualified personnel.
The wheelchair can be disinfected with disinfectants that contain 70-80% ethanol. Do not use
disinfectants containing chlorine or phenol.
Cleaning seat and back covers
The seat cover, back cover and extra back cover can be washed at 60°C. See the washing
instructions on the different materials. To disinfect; use approved chemical disinfectant. Do not use
heat disinfection.
Conditions that can damage the wheelchair
The wheelchair should not be used in temperatures below –35°C or in excess of 60°C. There are no
restrictions with regard to humidity or atmospheric pressure. Storing the wheelchair does not require
any special conditions in addition to the above.
Screws and nuts
Screws and nuts can become loose over time. Remember therefore to check these at regular
intervals and tighten where necessary. A screw locking device such as Blue Locktite, no. 243, can
be used. After a lock nut has been removed, it loses some of its locking properties and should be
replaced.
Driving wheels
The driving wheels have spokes. These should be adjusted at least once a year. Apply to a local cycle
dealer or to your nearest help centre.