manualshive.com logo in svg

Breezy Exigo 30, User Manual, Page: 38 / 40

Share
Download
Breezy Exigo 30 User Manual Download Page 38

38

MB3197-EN

GUARANTEE

Warranty period table

Description

Warranty period

Examples include, but are not limited 
to the parts mentioned below

Frame

5 years

Weldment/frame

Service Parts

New: 1 year after invoice
Repaired: 90 days after invoice

Brakes

Consumable parts

40 days after invoice

Seat- and back textiles, wheels, 
griphandles etc.

Options/
Accessories

2 years

Headrests, legrests, drum brake etc.
Not being service part or consumable 
part.

Sunrise will only accept shipment costs and corrective costs related to warranty on equipment during 
the warranty period.

This warranty will void in case of:

•  The product and/or its parts being modified or items having been added by others than Sunrise;
•  Changes in cosmetic appearance by use;
•  Failure to observe the instructions for use and maintenance, use other than normal use, wear 

and tear, negligence, collateral damage by neglect of earlier symptoms, overloading, third-party 
accidents, non-original parts used and defects not caused by the product;

•  Circumstances beyond our control (flood, fire, etc.).

This warranty does not cover:

•  Tyres and inner tubes

Clients and/or Users have legal (statutory) rights under applicable national laws relating to the sale of 
consumer products. This warranty does not affect statutory rights you may have nor those rights that 
cannot be excluded or limited, nor rights against the entity from whom the product was purchased. 
Clients may assert any rights they have at their sole discretion.

Summary of Contents for Exigo 30









































Reviews:

No comments