manualshive.com logo in svg

Breezy Exigo 30, User Manual, Page: 17 / 40

Share
Download
Breezy Exigo 30 User Manual Download Page 17

17

 

A

  B

MB3197-EN

Figure 25

Figure 26

Adjusting the seat height – back 

Figures 25 and 26

On the wheelchair frame you will find a measuring 
scale (26A) showing the seat height in relation to 
the size of the driving wheel
•  Remove the driving wheel
•  Loosen the screw (26B) with a 27 mm wrench 

and unscrew until it stops

•  Pull the inner and outer wheel block slightly 

apart

•  Adjust the wheel block step-by-step up or down 

in accordance with the scale

•  Squeeze the inner and outer wheel block 

together

Note! 

It is important to ensure that the pins in the 

wheel block go into the holes in the frame and 
that the casing lies horizontally in the track before 
tightening the screw.

Find the dimension of your driving wheel at the 
top of the scale. The column under the wheel 
dimension shows where to place the wheel block 
in order to achieve the various seat heights.

Alternative driving wheel 

dimensions

Seat heights that can be 

achieved by the different 

steps on the scale

ADJUSTING THE WHEELCHAIR

Summary of Contents for Exigo 30









































Reviews:

No comments