20
15
10
5 0
-5
A
B
B
C
A
C
MB3197-EN
Figure 32
Figure 33
Figure 34
Adjusting the height of the back
Figure 32
In order to access the back tubing when adjusting
the back height, open the “lid” (32C) in the back
cover. The measuring scale (32A) shows the back
height. For easier access to the back tubing, raise
the pushing handle. The adjustment can be made
whilst the user is in the wheelchair. Additionally, it
is not necessary to remove the driving wheels in
order to adjust the back height.
• Loosen the screw in the back tubing (32B)
• Adjust to the desired back height. See the
measuring scale
• Re-tighten the screw
Adjusting the angle of the back
Figures 33 and 34
The angle of the back can be adjusted from –5° to
15°, in intervals of 5°. The scale showing the back
angle (34A) is located on the back fitting bracket.
The adjustment can be made whilst the user is
sitting in the wheelchair. Additionally, it is not
necessary to remove the driving wheels in order to
adjust the back angle.
• Loosen screw (34B) approx. 5 mm
• Pull out the lock ring (34C), adjust the angle
of the back and release the lock ring at the
desired angle
• Re-tighten screw (34B)
ADJUSTING THE WHEELCHAIR