manualshive.com logo in svg

BREDABEDS HORIZONTAL MURPHY BED WITH TOP HUTCH, Assembly Instructions Manual

Share
Download
BREDABEDS HORIZONTAL MURPHY BED WITH TOP HUTCH Assembly Instructions Manual Download Page 2

2

Thank you for purchasing a BredaBed!

THANK YOU!

OUR MISSION

BREDA, INC is a family owned and operated business. We sell space saving Murphy 

Beds that we design and manufacture here at our production facility in southwest 

Idaho. BREDA, INC advertises and sells these beds, primarily, to customers all over 

the United States.

QUESTIONS?

If, at any point during assembly you have questions, feel free to contact us.

Call us toll free at: 

1-855-466-4781

Email us at: 

[email protected]

Or, use the live chat feature at 

https://bredabeds.com

 when available.

If it’s after hours or during weekends, it’s best to email us. When contacting us, 

have your order number ready. If emailing us, attach any relevant pictures.

https://www.facebook.com/BredaBeds
https://twitter.com/BredaBeds

https://www.youtube.com/BredaBeds
https://www.pinterest.com/BredaBeds

Thank you for your Murphy Bed purchase by BredaBeds! When you’re ready to begin 

assembly, follow these instructions carefully and be sure not to skip any steps. If you 

have any trouble during the assembly process, feel free to contact us and one of our 

specialists will be happy to help guide you through the process. Once completed, we 

hope that your BredaBed will bring many years of enjoyment.

Summary of Contents for HORIZONTAL MURPHY BED WITH TOP HUTCH




































Reviews:

No comments

Brands by name

Popular brands

Load more brands