12
Chapter 1: Hardware insertion.
A
B B
A
Baseboard Notch
Front
Front
Bottom
Bottom
{
{
{
D
E
C
{
{
{
FIG. 1B
STEP 2
Referring to Fig. 1B,
and insert cam screws
from Hardware
Package #1.
BredaBeds Murphy
Beds are designed for a mattress thickness
of 11” or under, however Headboard
area
A
B
/
B
A
is adjustable for mattress
thicknesses greater than 11” if needed.
In
this area, use only 1 cam screw per side:
• Holes ‘
A
’ (closest to panel midpoint) are
for an 11” thick mattress.
• Holes ‘
B
’ (hole closest to panel edge) are
for a 11” to 13” thick mattress.
Even though we provide this adjustment,
we highly recommend using a mattress
that is 11” or under so that the headboard
will sit at an angle to minimize the gap
between the wall and the mattress.
Thus we recommend using holes ‘
A
’.
Baseboard Notch area
C
D
E
has adjustable
connections for the Bottom Nailer.
In this
area, use only 2 cam screws per side (4
total) in the holes closet to the bottom.
If your baseboard notch was customized
larger than normal, you may only have 2 or
3 holes in this area.
• Holes ‘
C
’ if you have 2 holes in this area.
• Holes ‘
D
’ if you have 3 holes in this area.
• Holes ‘
E
’ if you have 4 holes in this area.
Normally use ‘
E
’ for standard or no notches.
