Breckwell BH32VF, Owner’S Instruction And Operation Manual

Page: 8 / 24

8
© 2021 Breckwell Hearth
GETTING STARTED
CAUTION:
GLOVES ARE RECOMMENDED WHEN HANDLING
CERAMIC FIBER LOGS TO PREVENT SKIN IRRITATION
FROM LOOSE FIBERS. LOGS ARE FRAGILE — HANDLE
WITH CARE.
MAKE SURE YOU HAVE RECEIVED ALL PARTS
Check your packing list to verify that all listed parts have
been received. You should have the following:
• Cast Iron Stove with Burner Assembly
• Installation/Operating Instructions
• Ceramic Fiber Logs
Carefully inspect the contents for shipping damage. If any
parts are missing or damaged, immediately inform the
dealer from whom you purchased the appliance. Do not
attempt to install any part of the appliance unless you have
all parts in good condition.
WHAT THE GAS TECHNICIAN WILL NEED FOR
INSTALLATION
You must have the following items available before
proceeding with installation:
• External regulator (for Propane/LPG) or high pressure
natural gas (1 to 2 psi system)
• Piping which complies with local codes
• Sediment trap (recommended)
• Pipe wrench
• Pipe sealant approved for use with propane/LPG (resistant
to sulfur compounds)
• Manual shutoff valve
• Tee joint
• Screwdrivers
WARNING:
DO NOT INSTALL THE HEATER …
• WHERE CURTAINS, FURNITURE, CLOTHING, OR OTHER
FLAMMABLE OBJECTS ARE LESS THAN 42” FROM THE
HEATER.
• IN HIGH TRAFFIC AREAS.
• IN WINDY OR DRAFTY AREAS.
WARNING:
IF THE AREA IN WHICH THE HEATER MAY BE OPERATED
DOES NOT MEET THE REQUIRED VOLUME FOR INDOOR
COMBUSTION AIR, COMBUSTION AND VENTILATION
AIR SHALL BE PROVIDED BY ONE OF THE METHODS
DESCRIBED IN THE NATIONAL FUEL GAS CODE, ANSI
Z223.1/NFPA 54, THE INTERNATIONAL FUEL GAS CODE
OR APPLICABLE LOCAL CODES.