7
EN
•
If the water tank (1) is empty, the indicator will light
up red.
•
Switch the Ultrasonic humidifier off by turning the
knob (9) counterclockwise and unplug the unit.
•
Fill the tank (1) with water, install it to its place and
switch the unit on.
•
After the unit operation, switch the Ultrasonic
humidifier off by turning the knob (9)
counterclockwise
•
and unplug the unit.
CLEANING AND MAINTENANCE
•
Hard water causes the appearance of mineral scale
inside the process chamber (5), on the sprayer and
in the water tank (1); mineral scale leads to improper
operation of the humidifier.
•
It is recommended to clean the process chamber (5)
and the sprayer weekly, and to change water in the
water tank (1).
•
If you are not going to use the Ultrasonic humidifier
for a long
•
time:
- pour the water out of the water tank (1) and the
process chamber (5)
WARNING!
Always switch the Ultrasonic humidifier off and unplug
it before maintenance works or cleaning.
- wash and clean the process chamber (5) and the
sprayer
- wash the water tank (1)
- dry the unit thoroughly and take it away for
storage.
WEEKLY CARE
•
Once a week wash the water tank (1), the process
chamber (5) and the sprayer with warm water and
neutral detergent and rinse thoroughly with water
(Abb. 5).
•
Add some detergent drops on the sprayer and wait
for several minutes. Remove the deposits from the
sprayer surface with a brush (Abb. 6).
•
Notes:
— you can use scale removal substances for
electric kettles as a cleaning agent for the process
chamber (5) and the sprayer strictly following the
instruction.
•
Clean the unit body (6) with a slightly damp cloth and
then wipe the body (6) dry.
•
Do not immerse the unit body (6), the power cord and
the power plug into water or other liquids. Provide
that no liquid gets inside the unit body (6).
•
Do not use solvents or abrasives to clean the surface
of the body (6) and the water tank (1).
STORAGE
•
Clean the Ultrasonic humidifier before taking it away
for storage, make sure that the Ultrasonic humidifier
