6
EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using it.
•
Use the humidifier at the room temperature from
+10° С to +40°С and
•
relative humidity less than 80%.
•
Unpack the unit and remove all the packaging
materials.
•
Keep the original package.
•
Check the delivery set.
•
Read the safety measures and operating
recommendations.
•
Examine the unit for damages; if the unit is damaged,
do not plug it into the mains.
•
Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains.
USING THE ULTRASONIC HUMIDIFIER
•
Remove the water tank (1) from the unit body (6),
remove the lid with the «mist» release opening (Abb.
1).
•
Turn over the water tank (1), turn the lid (4)
counterclockwise and remove it (Abb. 2).
•
Before the first use it is recommended to remove the
filter (3) turning it counterclockwise and to put the
filter (3) into a container with water for 5-10 minutes.
•
Install the filter (3) on the lid (4) and thread it rotating
clockwise.
•
Fill the water tank (1) with the required amount of
water (Abb. 3).
•
Notes:
— if the tap water used is hard, use water
cleaned with household filters or mix tap water with
distilled water in proportion 1:1.
•
Install the lid (4) on the water inlet (2) and thread it
turning clockwise.
•
Place the filled water tank (1) on the unit body (6).
•
Wait till the process chamber (5) is filled with water.
•
If you want to use the aromatization function, remove
the container (7). Add some drops of water-soluble
aromatic oil and install the container (7) back to its
place (pic 4).
•
Notes:
- use water-soluble aromatic oils only
- if you are not going to use the aromatization
function, remove the container (7), wash it with
water, dry and install back to its place
•
Insert the power plug into the socket.
•
Switch the Ultrasonic humidifier on by turning the
knob (9) clockwise, the indicator will light up green.
•
Set the mist release intensity by turning the knob (9).
•
To turn the illumination on press the button (8), to
switch the illumination off press the button (8) again.
