BRAYER BR2401, Instruction Manual

Page: 12 / 96

12 EN
• Press the «Keep warm/Cancel» button (24) to turn off
the program «Rice».
«Soup» Program
• The «Soup» program is intended for the preparation of
various broths or soups.
• Prepare the required food and put it in the bowl (5),
add the necessary quantity of water following the
recommendations in the section «RULES FOR USING
THE COOKING BOWL».
• Place the lid (4) in the initial place of installation (7) (fig.
4), turn the lid (4) counterclockwise until bumping.
• Check that the pressure limiting valve (1) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Insert the power cord plug (22) into the connector on
the multicooker body (10).
• Insert the power cord plug (22) into an electrical socket.
• Press the «Program» button (23) to choose the «Soup»
cooking program, and the «Soup» symbol (29) will light
up and will be flashing on the display.
• The default pressure holding time is 15 minutes, you
can change the pressure holding time by pressing the
« » buttons (26), the longer the pressure holding
time is, the softer the cooked food will be.
• In 5 seconds, the multicooker will turn on in the «Soup»
cooking program.
• The multicooker regulates the pressure and maintains
the temperature of the liquid, so the liquid does not
go into a strong boil. For example, when cooking
chicken broth, it will be transparent, if you need to
chop the cooked food, use a separate dish and add
the chopped food just before serving.
• Press the «Keep warm/Cancel» button (24) to turn off
the program «Soup».
«Pasta» program
• The cooking program «Pasta» is used for cooking
various types of pasta, noodles or for cooking
porridge.
• Place the pasta or noodles in the bowl (5) and add
the required quantity of water.
• When preparing products in the «Pasta» program,
it is recommended not to completely cover the
multivark with a lid (4).
• Insert the power cord plug (22) into the connector on
the multicooker body (10).
• Insert the power cord plug (22) into an electrical
socket.
• Press the «Program» button (23) to choose the
«Pasta» cooking program, and the «Pasta» symbol
(29) will be flashing on the display.
• The default pressure holding time is 5 minutes, you
can change the pressure holding time by pressing
the « » buttons (26).
• In 5 seconds, the multicooker will turn on in the
«Pasta» cooking program.
• Press the «Keep warm/Cancel» button (24) to turn off
the program «Pasta».