6
EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
•
Make sure that specified specifications of power
supply voltage of the unit correspond to the
specifications of your mains.
•
Clean the unit body surface (4), open the waffle
maker and wipe the frying plates (2) with a soft,
slightly damp cloth, and then wipe it dry.
•
Install and use the unit on a flat, dry, steady and
heat-resistant surface with free access to the mains
socket.
• Use the unit in a well-ventilated room, for normal air
circulation the free space around the waffle maker
should be at least 10-15 cm on each side.
•
Before the first use smear some vegetable oil over
the frying plates (2).
•
Close the waffle maker and insert the power cord
plug into the mains socket, the indicator (3, 4) will
light up orange.
• When the indicator (4) lights up green, unplug the
waffle maker and wait until it cools down completely.
•
Take the handle (1), open the waffle maker. Remove
the remaining oil from the frying plates (2) with a
paper towel or a clean cloth.
Notes:
-
when you switch the unit on for the first time,
some smoke or foreign odor may appear. It is
normal and not covered by warranty.
-
the foreign odor can change the taste of the first
waffles that you made, so it is not recommended
to eat them.
MAKING WAFFLES
• Make the batter.
•
Install the waffle maker correctly.
• Insert the power cord plug into the mains socket, the
indicators (3) will light up orange.
Notes:
- the indicator light up orange (3) will be glowing all
the time while the unit is plugged in;
- the indicator lights up green will periodically switch
