BRAYER BR1246, Instruction Manual, Page: 5 / 31

8 9 EN EN
• Insert the power plug into the mains socket.
• Immerse the blender attachment (1) into the bowl
with food that you want to chop/mix.
ATTENTION!
Hold the motor unit with the blender attachment (1)
vertically while processing the food (pic.1).
• To switch the unit on, press and hold down the button
(4) « ». Use this operation mode for mixing liquid
products.
• When you press and hold the button (4) « » you
can control the attachment rotation speed by turning
the control knob (5). Use this operation mode for
processing of liquid and solid products.
• For operation at the maximal rotation speed, press
and hold down the button (3) «T».
• Notes:
- products should be put into the bowl before the
unit is switched on. The amount of products to be
processed should not exceed 2/3 of the capacity
of the bowl in which they are processed.
- before chopping and mixing peel the fruit, remove
inedible parts, such as stones, and cut fruit into
15x15x15 mm cubes. Put them into a bowl and
add some juice or water. The maximal amount of
products should not exceed 350 g and 250 ml of
water or juice.
- do not chop or mix frozen food.
• Use the whisk attachment (7) only for beating egg
whites, making biscuit dough or for mixing ready
desserts.
Before installing the whisk attachment (7), make
sure that the power plug is not inserted into the
mains socket.
• Insert the whisk attachment (7) into the whisk gear
(6).
• Insert the whisk gear (6) into the motor unit, make
sure that the gear (6) and the whisk (7) are fixed
properly (fig. 2).
• Insert the power plug into the mains socket.
• Immerse the whisk attachment (7) into a suitable
bowl with food.
• To switch the unit on, press and hold down the button
(4) « ».
• When you press and hold the button (4) « » you can
control the attachment rotation speed
• by turning the control knob (5).
• For operation at the maximal rotation speed, press
and hold down the button (3) «T».
• Release the button (3 or 4) to switch off.
• After you finish using the unit, disconnect the power
plug from the mains socket, disconnect the whisk
gear (6) from the motor unit (pic. 3).
• Remove the whisk attachment (7) from the gear (6).
POTATO MASH MAKING ATTACHMENT
Continuous operation time should not exceed
1 minute while using the potato mash making
attachment (8). Make at least a 3-minute break
between operation cycles.
• Before installing the attachment (8), make sure that
the power plug is not inserted into the mains socket.
• Insert the attachment (8) into the motor unit, and turn
it counterclockwise as far as it will go, make sure that
the attachment (8) is fixed properly (pic. 3).
• Insert the power plug into the mains socket.
• Immerse the attachment (8) into the bowl with boiled
potatoes.
ATTENTION! When chopping hard vegetables, for
example, car rots — cut the carrot into small 15x15x15
mm pieces and put them in the suitable container.
The maximal weight of the carrot should not exceed
150g. Add 250 ml of water.
• To switch the blender attachment (1) rotation off
release the button (3 or 4).
• After you finish the unit operation, take the power
plug out of the mains socket and remove the blender
attachment (1) by pressing the release buttons (2)
(pic. 1).
ATTENTION!
- Do not remove the blender attachment (1) during
the unit operation.
- To avoid damaging the knives of the blender
attachment (1) do not process very hard products,
such as cereals, rice, coffee beans, hard cheese,
frozen food etc.
- If the foodstuffs are hard to chop with the blender
attachment (1), add some water, juice, liquor etc.
USING THE WHISK ATTACHMENT
• Continuous operation time should not exceed 1
minute while using the whisk attachment (7). Make at
least a 3-minute break between operation cycles.
ATTENTION! Do not use the whisk attachment (7) to
knead tight dough (pic.1).
ATTENTION! When making the potato mash hold the
motor unit with the attachment (8) vertically (pic. 3).
• To switch the unit on, press and hold down the button
(4) « ».
• When you press and hold the button (4) « », you
can control the attachment rotation speed by turning
the control knob (5).
• For operation at the maximal rotation speed, press
and hold down the button (3) «T».
• When you make potato mash, add warm milk or
some potato pot liquor.
• Release the button (3 or 4) to switch off.
• After you finish the unit operation, take the power
plug out of the mains socket and remove the
attachment (8).