BRAYER BR1186, Instruction Manual

Page: 6 / 28

6 EN
• Do not immerse the coffee grinder, the power cord
and the power plug into water or any other liquids.
USAGE
Continuous operation time of the coffee grinding
operation cycle should not exceed 30 seconds.
Make a 2-4 minute break between operation cycles.
• Grind only the necessary amount of coffee beans
right before the coffee making.
• Turn the lid (1) counterclockwise and remove it (fig.
2).
• Add the coffee beans into the process chamber (2).
The coffee grinder capacity does not exceed 60 g of
coffee beans (fig. 3).
• Install the lid (1) (fig. 4) in place and turn it clockwise
as far as it will go (fig. 5).
• If the lid (1) is installed improperly, the coffee grinder
will not switch on.
• Insert the power plug into the mains socket.
• Press on the lid (1) and hold it (fig. 6). It is
recommended to slightly sway the coffee grinder from
side to side during grinding of coffee beans.
Note: - for better grinding of coffee beans, you can use
the pulse mode of the coffee grinder, press on the lid
(1) at intervals of 4 to 8 seconds, in this case the coffee
beans heat up less and reveal their taste and aroma to
the maximum.
• After grinding the coffee beans release the lid (1),
wait for the chopping knives to stop completely and
pull the power plug out of the socket.
Note:
– when using the unit for the first time, a foreign
smell from the electric motor can appear – this is normal
and it is not covered by warranty.
• Slightly tap on the lid (1) to crumble the ground
coffee stuck to it.
• Turn the lid (1) counterclockwise and remove it
(fig. 2), put the ground coffee into a suitable sealed
container.
• Clean the coffee grinder.
CLEANING
• Unplug the coffee grinder after you finish using it.
• Remove the lid (1), wipe the unit body, the process
chamber and the chopping knives (2) with a slightly
damp cloth and then wipe them dry.
• Wash the lid (1) with warm water and neutral
detergent, rinse and wipe it dry. Do not wash the lid
(1) in a dishwashing machine.
• Do not use any solvents or abrasive cleaners to
clean the coffee grinder.
• Do not immerse the coffee grinder, the power cord
and the power plug into water or any other liquids.
STORAGE
• Clean the coffee grinder before taking it away for