BRAYER BR1107, Instruction Manual, Page: 17 / 76

17 EN
• Do not immerse the coffee maker body, the power cord
and the power plug into water or any other liquids.
• Wash the water tank (10) and the milk container (16)
with warm water and soft detergent, then dry them.
• If there is mineral scale in the water tank (10), pour
some citric acid solution or table vinegar in the water
tank (10). After mineral scale dissolves, wash the water
tank (10).
• Slightly lift the front part of the tray (1) and remove it,
pour the water out of it, remove the grid (2) from the
tray (1), wash the tray (1) and the grid (2) with water
and neutral detergent, dry them and install back to their
places.
STORAGE
• Before taking the coffee maker away for long storage,
unplug it and let the unit cool down.
• Clean the coffee maker.
• You can place the filter holder (18) and the measuring
spoon (21) on the coffee maker body for easy storing
(pic. 14).
• Pack the coffee maker in the original package.
• Use and store the coffee maker at the temperature
above 0 °C.
• Keep the coffee maker in a dry cool place out of reach
of children and disabled persons.
TROUBLES AND TROUBLESHOOTING
Problem Cause Solution
The coffee
maker can't be
switched on
No voltage in the
mains socket.
The power plug is not
completely inserted
into the socket
Make sure that the mains
socket is operating by
connecting a known good
electric appliance to it.
Disconnect the power plug
and connect it into the
socket
Water leaks from
the lower part of
the unit
The water tray is full Pour out water from the tray
Coffee leakage
from the filter
holder
Loose connection of
the filter and boiler
gasket, ground coffee
got on the edges of
the filter
Clean the edges of the filter
Coffee has a
foreign smell
Wrong process of
scale removal in the
boiler
Improper storage of
coffee.
See the chapters «Before
using the unit», «Descaling»
and perform them several
times
Use fresh ground coffee.
Keep coffee in a dry cool
place.
Steam doesn’t
froth milk
You used skimmed
milk
Milk is not cold
enough
The cappuccinator
pipe is blocked
Use only whole milk with fat
content 4-6%
Use cold milk
Clean the cappuccinator
pipe and the cappuccinator
lid (see the chapter
«CLEANING THE
CAPPUCCINATOR»)