BRAYER BR1104, Instruction Manual

Page: 8 / 56

8 EN
• Install the filter holder (5) into the coffee maker. The
holder (5) ledges should match the grooves on the
boiler « », after that turn the filter holder handle
(4) to the right until bumping « ».
• Place a suitable cup on the grid (2).
• Insert the power plug into the mains socket.
• Switch the coffee maker on by pressing the on/off
button (11) « », the indicator (7) « » will light up.
• Wait until the indicator (8) « » lights up, then
switch the water supply on by pressing the button
(12) « ». After 15-20 seconds press the button
(12) « » again to switch the water supply off and
pour the water out of the cup.
• Preheating is over.
MAKING ESPRESSO
• Put ground coffee in the filter (6), slightly tamp the
ground coffee with the back side of the measuring
spoon (21).
• Install the filter holder (5) into the coffee maker. The
holder (5) ledges should match the grooves on the
boiler « », after that turn the filter holder handle (4)
to the right until bumping « ».
• Wait until the indicator (8) « » lights up, the coffee
maker is ready for making coffee.
• Switch the water supply on by pressing the button (12)
« », watch the cup filling with the ready coffee,
press the button (12) « » again to switch the water
supply off.
• Switch the coffee maker off by pressing the on/off
button (11) « », the indicator (7) « » will go out.
• Wait until the coffee maker cools down and remove
the filter holder (5) by turning the handle (4) to the left
« ». Remove the ground coffee remnants and wash
the filter (6).
• For easy removing of the coffee remnants use the
retainer on the handle (4) to prevent the filter (6) from
falling off the holder (5).
•
Notes:
- The cups should be preliminary heated up, when
water heats up in the boiler, put the cups on the
tray (14).
- If you need to promptly remove the filter holder
(5), you have to reduce the pressure in the boiler,
switch the coffee maker off by pressing the on/off
button (11) « », place a suitable cup under the tip
ATTENTION!
When making coffee do not leave the operating
coffee maker unattended, as it is necessary to watch
the cup being filled with ready coffee!
AFTER PREHEATING:
• Make sure that the control buttons (10, 12) are in the
off position.
• Make sure that the steam supply is closed. To do this
turn the knob (15) « » clockwise until bumping
«•».
• Remove the filter holder (5) by turning the handle (4)
to the left « » and remove the filter holder (5).