800-350-8739
29
Brave
Inspection and Maintenance
Important Notice
DO NOT mix tractor hydraulic oil with transmission fluid. Use one or the other.
4
. Refill the hydraulic tank.
a
. Reconnect inlet hose (2) to the pump.
b
. Remove the hydraulic tank fill cap and
fill the tank with the recommended
type and quantity of oil. Replace the
cap.
5
. Drain and refill the piston end of the
cylinder.
NOTE:
Hose (1) should still be in the waste
oil container.
a
. Hold the valve handle in the retract
position and pull the engine pull start
cord until the rod is fully retracted. This
step removes the old oil from the piston
end of the cylinder.
b
. Reconnect return hose (1) to the oil
filter.
c
. Extend the cylinder by holding the valve
handle forward and pulling on the
engine’s pull start cord until the cylinder
is completely extended. This step refills
the piston end of the cylinder.
6
. Start the engine and cycle the cylinder.
a
. Replace the spark plug and spark plug
wire.
b
. Start the engine and cycle the cylinder
several times.
c
. Retract the cylinder and shut off the
engine.
d
. Recheck the hydraulic tank to make
sure oil is filled within one inch from the
top of the tank.
Summary of Contents for VH1322GC
Page 35: ...800 350 8739 35 Brave Decals 4 5 6 7 8 9 ...
Page 46: ...Notes Brave 800 350 8739 44 ...
Page 47: ...Notes 800 350 8739 45 Brave ...
