Page 43
Maintenance and Lubrication Schedule
750
Cycles
See NHTSA Operations Checklist
Correct as needed.
Correct as needed
Verify NHTSA Operations Checklist
Inspect lift for wear, damage, or any abnormal
condition
Inspect lift for rattles
continued
Apply grease (synthetic) to contact areas between
inner/outer fold arms. See Lubrication Diagram.
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Perform all procedures listed in previous section also
Inner/outer fold arms (2)
Platform pivot pin bearings (4)
Outer fold arm bearings (8)
Inner roll stop pivot bearings (2)
Inner roll stop lever bearings (2)
Inner roll stop lever slot (2)
Saddle support bearings (8)
Inner fold arm roller pin bearings (4)
1500
Cycles
continued
