Page 45
Maintenance and Lubrication Schedule
1500
Cycles
Make sure lift operates smoothly
Inspect external snap rings:
• Outer fold arm (6)
• Lift-Tite
™
latch roller (2)
• Lift-Tite
™
latch gas (dampening) spring (4)
• Inner fold arm cam followers (4)
• Inner fold arm roller pins (4)
• Outer barrier hydraulic cylinder mounting pin (2)
• Inner roll stop lever bracket pins (2)
Inspect inner roll stop locks (2) and torsion springs
(2) for wear or damage and for proper operation.
Inspect outer fold arm pins (2), axles (2) and
bearings (8) for wear or damage and positive
securement
Remove pump module cover and inspect:
• Hydraulic hoses,
fi
ttings and connections for
wear or leaks
• Harness cables, wires, terminals and connec-
tions for securement or damage
• Relays, fuses, power switch and lights for
securement or damage
continued
Realign towers and vertical arms. Lubricate or
correct as needed.
Resecure or replace if needed.
Replace damaged parts and resecure as needed.
Apply Light Oil to inner roll stop lock pivot points.
Replace damaged parts and resecure as needed.
Apply Light Oil.
Resecure, replace or correct as needed.
