Page 44
Maintenance and Lubrication Schedule
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Grease to both sides of slot. See
Lubrication Diagram.
Correct, replace damaged parts and/or relubri-
cate.
Resecure, replace or correct as needed. See
Platform Angle Instructions and Tower Micro-
switch Adjustment Instructions.
Replace damaged parts
Resecure, replace or adjust as needed. See
Microswitch Adjustment Instructions.
1500
Cycles
continued
Inner fold arm cam followers (4)
Parallel arm pivot pin bearings (16)
Handrail pivot pin bearings (4)
Hydraulic cylinder pivot bushings (8)
Outer barrier lever guide slot
Inspect Lift-Tite
™
latch rollers for wear or damage,
positive securement and proper operation (2)
Inspect inner roll stop for:
• Wear or damage
• Proper operation. Roll stop should just rest on
top surface of the threshold plate.
• Positive securement (both ends)
Inspect handrail components for wear or damage,
and for proper operation
Inspect microswitches for securement and proper
adjustment.
continued
