Page 19
Operation Notes and Details
horizontal (bridging) position
when it reaches vehicle
fl
oor
level. The inner roll stop must
overlap the threshold (base)
plate a minimum 1/2".
When the FOLD switch is
pressed and the platform folds
from
fl
oor level to the stow
(vertical) position, the inner roll
stop automatically travels inboard
to the stowed position.
Interlock Features:
The inner
roll stop features a locking mecha-
nism that prohibits the platform
from lowering if the lock is not
engaged. The inner roll stop
also senses weight to prohibit lift
operation. The lift will not function
if inner roll stop is occupied.
Discontinue lift operation immedi-
ately if the inner roll stop does not
operate properly.
Outer Barrier:
This cylinder-pow-
ered barrier provides a ramp for
wheelchair loading and unloading
at ground level (see photos on fol-
lowing page). When the platform
WARNING
Discontinue lift use
immediately if any
lift component does
not operate prop-
erly. Failure to do so
may result in serious
bodily injury and/or
property damage.
lowers fully to ground level, the
cylinder compression spring
automatically unfolds (rotates)
the barrier to the ramp position
(fully unfolded).
Although the outer barrier is
lift-powered, the activation of
the barrier is controlled by the
lift operator (attendant). Press-
ing the DOWN switch unfolds
the barrier. The outer barrier is
cylinder-powered to automati-
cally fold (rotate) to the vertical
position as shown when the UP
switch is pressed (barrier raises
before platform raises).
Interlock:
The outer barrier
senses weight to prohibit lift op-
eration. The lift will not function
if the outer barrier is occupied.
