Page 41
Replace missing, worn
or illegible decals.
Failure to do so may
result in serious bodily
injury and/or property
damage.
WARNING
Decals and Antiskid
Decals
The lift is only as safe as the
operator. Replace any missing,
worn or illegible decals!
Part
numbers are provided for decals.
Inspect your lift for missing, worn
or illegible decals. Call 1-800-THE
LIFT for replacements.
Note:
Clean surfaces with
isopropyl alcohol before
decal or antiskid application.
Use a clean cloth or paper
towels.
Do not
use oily
shop rags. Wipe surface
free of residue with dry
portion of cleaning cloth.
See Decals on page 42 also.
18118
O
P
E
N
C
L
O
S
E
18118
HAND PUMP
VALVE
HAND PUMP
TO UNLOAD PASSENGER:
1. TO UNFOLD PLATFORM (OUT):
Follow the MANUAL UNFOLD
INSTRUCTIONS posted on the fold
actuator.
2. DOWN (TO LOWER):
Use hand pump handle to open (turn)
hand pump valve counterclockwise
(open 1/2 turn only).
TO LOAD PASSENGER:
1. UP (TO RAISE):
Using hand pump handle:
a. Close hand pump valve clockwise.
b. Insert handle in pump and stroke.
2. TO FOLD PLATFORM (IN):
Removal of actuator is required. Read
manual for details.
Close valve
before operating
electric pump.
MANUAL
INSTRUCTIONS
19342
20620
25674
OPERATING
INSTRUCTIONS
19342
Read warnings and operate lift as
outlined on LIFT OPERATING
INSTRUCTIONS decal. Lift operating
instructions apply to wheelchair
passengers and standees.
Standees must
stand at center of platform (fully inside
yellow boundaries), grip handrails and
lower head to clear door jamb header.
Lift Interlocks
vary in type and operation. Interlock
(if equipped) must be operated as
instructed by transit authority.
Standee Instructions:
Interlock Instructions:
WARNING
Read manual before
operating lift. Call
1-800-THE LIFT to
receive operator's
manual. Failure to
do so may result in
serious bodily injury
and/or property
damage. Keep
manual in lift pouch.
25674
Oper
ua
l
Man
ator's
25857
LIFT OPERATING
INSTRUCTIONS
• Read manual before operating lift.
• Load and unload on level surface
only.
• Engage vehicle brake before operating
lift.
• Provide adequate clearance outside of
vehicle to accommodate lift.
• Do not operate lift if you suspect lift
damage, wear or any abnormal
condition.
• Keep operator and bystanders clear
of area in which lift operates.
Whenever a wheelchair passenger
is on the platform, the:
• Passenger must be positioned
fully inside yellow boundaries
• Wheelchair brakes must be locked
• Roll stop(s) must be up
Failure to follow these rules may result
in serious bodily injury and/or property
damage.
WARNING
OPEN DOOR(S) AND SECURE
TO UNFOLD PLATFORM:
Stand clear and press UNFOLD switch
until platform stops (reaches floor level).
TO UNLOAD PASSENGER:
1. Load passenger onto platform and
lock wheelchair brakes.
2. Press DOWN switch until the entire
platform reaches ground level.
Release switch.
3. Press DOWN switch until roll stop
unfolds fully.
4. Unlock wheelchair brakes and unload
passenger from platform.
TO LOAD PASSENGER:
1. Load passenger onto platform and
lock wheelchair brakes.
2. Press UP switch to fold roll stop
fully. Release switch.
3. Press UP switch until platform stops
(reaches floor level). Release switch.
4. Unlock wheelchair brakes and unload
passenger from platform.
TO FOLD PLATFORM:
Press FOLD switch until platform
stops. Release switch.
CLOSE DOOR(S)
20271
U.S. Patent No. 5,261,779
1. Disconnect black connectors.
2. Pull detent pin from handle.
3. Pull handle down.
4. Remove hairpin cotter.
5. Support platform and pull
actuator pin.
6. Unfold platform.
Note: Read manual for FOLD (IN)
procedure.
20620
MANUAL UNFOLD
INSTRUCTIONS
4
5
1
2
3
