Page 19
Pre-Lift Operation Notes and Details
the latch foot contacts the
ground (latch raises above the
roll stop).
Outboard Roll Stop and Roll
Stop Latch Operation:
The
operator (attendant) must press
the DOWN switch to lower the
platform fully to the ground.
The attendant
must view
the
platform as it lowers to
be
certain
the
entire platform
reaches and rests safely on the
ground (see photo below).
Stop
pressing the DOWN switch if
any portion of the platform is
obstructed while descending or
the
entire
platform does not
reach ground level
for any
reason
(contact with an ob-
struction, mechanical failure,
exceeding the lift “floor-to-
ground” capacity, etc.).
After the platform is fully low-
ered (entire platform reaches
ground level), the attendant
should continue to press the
WARNING
Discontinue lift use
immediately if any lift
component does not
operate properly.
Failure to do so may
result in serious
bodily injury and/or
property damage.
The attendant
must view
the
platform as it lowers to
be
certain
the
entire platform
reaches and rests safely on
the ground.
