background image

Page 23

The wheelchair 

brakes must be

locked

, the outboard roll stop

must be in the 

fully up

 (vertical)

position and the roll stop latch
must be 

fully engaged when-

ever a passenger is on the
platform

.

Do not use the outboard roll stop
as a barrier (brake).  Stop and
brake the wheelchair when fully
loaded on the platform.  Manually
stop and brake manual wheel-
chairs.  Stop powered wheel-
chairs with the wheelchair con-
trols.  Turn powered (electric)
wheelchairs off when on the
platform.

If the roll stop, bridge plate,
handrails or any other lift compo-
nent does not operate as outlined
in this manual, 

discontinue lift

Pre-Lift Operation Notes and Details

use immediately

 and contact

your Braun Corporation sales
representative in your area or call
The Braun Corporation at 1-800-
THE LIFT.  One of our national
product support representatives
will direct you to an authorized
service technician who will
inspect your lift.

loading or unloading passengers
in or out of the vehicle.

Whenever a
passenger is on the
platform, the:
•  Passenger must be

positioned fully
inside yellow
boundaries

•  Wheelchair brakes

must be locked

•  Roll stop must be

UP

Failure to follow these
rules may result in
serious bodily injury
and/or property
damage.

WARNING

WARNING

Discontinue lift use
immediately if any lift
component does not
operate properly.
Failure to do so may
result in serious
bodily injury and/or
property damage.

Summary of Contents for L200UARS Ultra Series 05




















































Reviews: