Braun Identity J 300 Manual Download Page 10

Page: 10 / 84

3. Place the filter (6) onto the juice collector and

press it down until it locks on the motor coupling
(fig b).

4. Slide the pulp container (4) on to the rear part of

the motor unit until it connects. Be sure it snaps
into place (fig. c).

5. Attach the lid (7) (fig. c). Attach both clamps to

the lugs on the lid and push down firmly until you
hear them snap into place (fig. d).

6. Make sure the juice jug (13) is placed underneath

the juice spout (10) (fig. e). Capacity: 1250 ml.

The juice collector comes with a foam separator
(12) to help keeping the juice virtually foam-free. If it
is not required simply remove the foam separator.

Extracting juice

•

Important: Use only well ripened fruits otherwise
the filter (6) may get clogged up.

•

Before use, always unwind the power cord
completely from the cord storage (14).

•

Fruits/vegetables need to be washed if they will
be processed unpeeled.

•

Maximum operation time / amount at a time:
15 minutes / 5 kg.
Let appliance cool down sufficiently afterwards.

Type of fruits/
vegetables

Preparation

Pro-
cessing

Hard fruits/
vegetables e.g.
apples, pears,
carrots, beets

Remove inedible
peel
Process seed fruits
with cores

Position II

Leaf vegetables
e.g. cabbage,
spinach or herbs

Roll up leaves
together tightly
before processing

Soft fruits/
vegetables e.g.
citrus fruits, kiwis

Remove inedible
peel

Position I

Grapes

Cut off main stems

Stone fruits e.g.
plums, peaches

Remove stones

Melons

Peel and cut into
pieces to fit the
filling shaft

Tomatoes,
cucumbers,
raspberries

No further
preparation needed

Berries

Only suitable in
mixed juices

Rhubarb, fruits that contain starch
(bananas, mangoes, papayas,
avocados and figs), very hard and
fibrous fruits or vegetables

Not
suitable

•

Put fruits or vegetables into the filling shaft (8)
(fig. e).

•

Turn the switch (2) to position «I» or «II»:

•

Press slightly with the pusher (9) (fig. f). Add
more fruits or vegetables while the motor is
running.

•

The amount of juice you extract depends on the
fruits and vegetables.

•

Fruit and vegetable juices contain valuable
vitamins and minerals, which quickly deteriorate
when they come into contact with oxygen or light.
Drink juice fresh – right after it has been extracted.

Recipe Example:

Bitter lemon juice as ingredient for drinks & jam
Put 3 washed, untreated and unpeeled lemons into
filling shaft. Turn the switch to position «II» while
pressing constantly with the pusher to juice the
lemons for 5 seconds time. Let the device cool
down before repeating this recipe

Emptying the pulp container and filter

Pulp container (4): As soon as the pulp container
looks full turn off the appliance, unplug it and empty
the pulp container.
Filter (6): If the juice suddenly becomes much
thicker, if larger amounts of pulp get stuck between
filter and lid and/or if you can hear the motor speed
slow down, the filter and juice collector must be
emptied and cleaned (see «Disassembling »).
Empty the pulp container and assemble the appli-
ance again.

Drip stop feature

(only model J700/J500)

When the juice spout (10a) is in a tilted position it
functions as a drip stop and collects the dripping
juice: Turn the appliance off, wait for a few seconds
until the drips slow down. Then push the spout (10a)
to the tilted position (fig. g).

Disassembling

1. Switch off the appliance by turning the switch (2)

to position « O » and unplug it (fig. h).
Model J700/J500: Put juice spout (10a) in upright
position to allow remaining juice to drain off.

2. Remove the pusher (9). Release the clamps to

unlock the lid (fig. h). Remove the lid.

3. Slide any of pulp from juice collector into the pulp

container.

4. Remove the juice collector (5) together with the

filter (6). Take the filter out of the juice collector
(fig. i).

5. Remove the pulp container (4) by pulling (fig. i).
6. Remove the juice spout (10a/10b) by pressing

on both sides with thumb and forefinger at the
check marks (fig. j).

Cleaning