Braun BP4000, Instruction Manual, Page: 7 / 108

Recalling Stored Readings
• Press the «memo» (3) button. nothing will appear on the display if there is no data stored
in the memory. if there is data stored in the memory, the latest recorded set of measure-
ment which are the Systolic pressure, Diastolic pressure, Pulse rate, and the recording
time and date will appear on the display for 1 minute.
• Press the «memo» (3) button to read the next line of stored data. The data called up on
the display is numbered accordingly.
• Press the (2) button to exit the memory mode.
Erasing data
• Press the «memo» (3) button into Memory mode.
• Press and hold the (5) button and then press the (4) button, all the stored
data will be erased.
• To check if the data was erased, press the «memo» (3) button. no data should show up
on screen.
Setting Month, Date and Time
(Fig. 12)
a. Press (5) button (“month” starts flashing)
Press (4) button to set the correct month (1,2,3,…..12)
b. Press (5) button again (“date” starts flashing)
Press (4) button to set the correct date (1,2,3,…..31)
c. Press (5) button again (“hour” starts flashing)
Press (4) button to set the correct hour (1,2,3,…..12)
d. Press (5) button again (“minute” starts flashing)
Press (4) button to set the correct minute (0,1,2,3,….59)
e. Press (5) button again to lock in time settings. Digits will stop flashing.
Low Battery Light Indicator
when the low battery light indicator flashes on the display, it means the battery is
low and the four batteries need to be replaced with Alkaline Lr6 (AA) batteries.
Storage and Cleaning
• Always keep the unit in the carrying case after its use.
• Do not put the item directly under the sunlight, in high temperature or humid and dusty
places.
• Do not store in extremely low (less than -20°C) or high (more than 60°C) temperature.
• use a piece of cloth with water or mild cleansing agent to clean the case and then use a
piece of dry cloth to wipe it dry. use piece of dry cloth to wipe the cuff when it is dirty.
• Do not use gas or any strong cleansers to clean it.
• when the unit is not to be used for a long time, remove the batteries. (Leaking of battery
liquid can be harmful).
Fig. 12