1.0
Introduction
4
LS3
Series
Overview
The intent of this manual is to provide information regarding safety, design guidelines, installation,
operation and maintenance of the tube heater. You must read and understand the instructions and all
safety warnings before installing the tube heater. This manual is property of the owner, and must stay
with the owner or unit after the installation is complete.
Heater Components
Prior to installation, verify that the heater’s gas type and voltage (as listed on the rating plate) match
that of your application. Also verify that you have received all heater contents included with your tube
heater. Reference the last page for a list of the kit contents for your model heater. Materials not included
in the heater kit contents (e.g., screws, vent material, terminals, etc.) are the responsibility of the
installer. Notify your product representative or Brant Radiant Heaters Ltd. of any discrepancy or missing
kit contents prior to installing unit.
1.0
Introduction
•
Overview
•
Heater Components
Tube Hanger
Reflector
Reflector Center Support
10 ft. Primary/
Secondary
Combustion
Chamber(s)
Baffles
Reflector End Cap with Clips
Tube Clamp
Burner Control Box
Type 1 Rubber Hose
Radiant
Tube(s)
Figure 1.1
•
Heater Components*
Igniter/
Sensor Box
Chains are not provided in kit.
Optional accessory. P/N: THCS
16 in. Burner Tube
* Not all items illustrated may be provided with your heater.
Refer to kit contents of the last page of the Series Manual.
Tube Hanger
Summary of Contents for LS3 Series
Page 2: ......
