Branson F36h, Operator'S Manual

Page: 85 / 132

5
-
11
OPERATION
5
CautiOn
Don’t put a foot on the clutch
pedal unnecessarily during
driving. Otherwise, the clutch
is set in the slip position, re-
sulting in premature wear of
the clutch.
Do not change the tractor
speed abruptly for safe driv -
ing.
Be careful of all directions of
the tractor before driving. If
not, it can cause an accident.
when driving on a steep slope
or moving to a location for
loading or unloading, do not
put your hand on the main
shift lever. if the shift lever is
half engaged, it can lead to an
accident. make sure to place
the lever in the low speed po-
sition in advance.
•
•
•
•
StOppinG
1. Stop the tractor with the brake
pedal and clutch pedal.
2. Put the main shift lever to the neu-
tral position.
3. Put the shuttle shift lever to the
neutral position.
4. Put all SCv levers to the neutral
position.
5. Set the PTO switch in the OFF po-
sition.
6. lower all implements on the
ground.
7. Push the hand throttle lever back
slowly
to decelerate the engine and keep
the engine for 1 - 2 minutes of un-
loaded idling.
8. make sure the parking brake is
applied.
9. Turn the main switch to the
「 OFF 」 position to stop the en-
gine.
CautiOn
when leaving the tractor, put
the shuttle shift lever into the
neutral position. if not, the
tractor may move even though
the engine is stopped.
•
K3트랙터-유럽향(Branson 36R,42R))-영문-011 11 2016-01-27 오전 10:57:02